|
|
Automatic Cleaning Systems
DESCRIPTION & FUNCTION
The Lagafors® Automatic Cleaning System, ACS, consists of a
controller unit and valve units for water, chemical and disinfectant
solutions. The system is designed for automatic cleaning of all types of
conveyor belts, elevator belts, etc., ...
The ACS unit is module-based and can control the cleaning of 5-30
different objects. The design is based on Lagafors's well-known VMS
satellite station series, and from a hygienic point of view the unit has
been adapted to the food-processing industry. The ACS system is ready
to be connected to any Lagafors pressurized water unit as well as the
VCC dosaging central for chemical and disinfectant solutions. The unit
is user friendly, as well as easy to use and maintain. The system gives
the customer consistent cleaning results, which means better hygiene and
time-savings, as well as reduced water, chemical and disinfectant
consumption. The ACS system can also be connected to and control your Lagafors® LFR flush ramp.
Features
- Easy to mount and connect
- Intelligent, hygienic design
- "All-in-One" principle
- Time optimization per belt
- "Start and go" principle
Benefits
- Time-efficient
- Easy to clean
- Rinses, foam cleans, disinfects
- Saving of time
- Minimal need of handling
Facts
- Low installation costs
- Excellent hygienic aspects
- Excellent and consistent cleaning results
- Lower material consumption
- Large work savings
The LAC unit is comprised of the following:
- Stainless steel controller cabinet with a PLC and controller display.
- Stainless steel valve cabinet with solenoid valves to regulate the water flow.
- Stainless steel valve cabinet with solenoid valves to regulate chemical and disinfectant solutions.
Technical information Lagafors® Automatic Cleaning System ACS
|
Model
|
ACS Controller Cabinet
|
ACS LP Water
|
ACS HP Water
|
ACS Chem. / Disinf.
|
Supply connections (internal thread)
|
Electric rating
|
230 V
|
|
|
|
Water, pressure
|
|
20-50 bar
|
50-100 bar
|
|
Water, flow
|
|
15-60 lit/min
|
10-50 lit/min
|
|
Water, dimensions
|
|
ISO-G 1/2" |
ISO-G 1/2 |
|
Chemical solution, pressure
|
|
|
|
6-80 bar
|
Chemical solution, flow
|
|
|
|
6-12 lit/min
|
Chemical solution, dimensions
|
|
|
|
ISO 3/8"
|
Disinfectant solution, pressure
|
|
|
|
6-8 bar
|
Disinfectant solution, flow
|
|
|
|
6-12 lit/min
|
Disinfectant solution, dimensions
|
|
|
|
ISO 3/8"
|
Air, pressure
|
|
|
|
5-8 bar
|
Air, flow
|
|
|
|
100-200lit/min
|
Air, dimensions
|
|
|
|
ISO 3/8"
|
Exit connections (internal thread)
|
Dimensions
|
|
5 x ISO 3/8"
|
The data is subject to variation and the producer reserves the right to change design specifications without notice. Recommendations: - We recommend a maximum length of 30 metres between the valve station’s chemical/disinfectant connections and the object to be cleaned. - A rotating ramp will further increase the cleaning effect and water savings. Please see the separate product sheet. - Electrical connections between the units are not included. A complete schematic connection diagram is included. - Pipe connections between the units are not included.  Automatic Cleaning System (342 KB)
|
|
The food industry and particularly the meat industry is one of the most demanding industrial environments in terms of hygiene and safety at work. All surfaces and equipment must be of non-toxic, easy to clean and chemically and mechanically resistant ...More
We would kindly like to invite you to visit us in Hall 5.2., stand C041. ...more
We would kindly like to invite you to visit us in Hall C2, Stand 23-24. ...more
|
|
